Drink Man Vario 2 / hot & all non carbonated products

Coffee and tea? The Drink Man Vario2 is designed and equipped according to the requirements of hot products.


Overview

  • The Drink Man Vario 2 can only dispense non-carbonated (still) beverages/products.
  • Because the Drink Man Vario 2 has two separately operated stainless steel tanks, it is capable of dispensing two different drinks at the same time.
  • The Drink Man Vario 2 can be used for hot and cold drinks.

Download brochure (PDF)

Make a non-binding request right now:

  • Advertising

    The smooth, flat outer cover of the Drink Man Vario 2 offers an ideal advertising surface.

  • The Drink Man Vario 2 has everything you need to get your message across: highly functional and robust, it combines optimally designed detail solutions for perfect, “wrinkle-free” brand advertising, guaranteeing a high recognition value.

  • Thanks to the firm, flat surface of the outer shell, the advertising message can be swapped as required within the space of a minute.

  • ready to go!

  • The transparent plastic cover opens on three sides for user-friendly insertion of the advertising banner, and holds it firmly in place while protecting it from the weather.

  • The tanks of the Drink Man Vario2 are much taller than they are wide. This keeps the weight very close to the carrier's vertical axis and prevents it from tipping backwards, making it much more comfortable to carry.

  • Specifications:

    •     Weight (without liquid): 7.9 kg
    •     Height: 74 cm
    •     Width: 35 cm
    •     Depth: 20 cm
    •     Weight per tank: 1.8 kg
    •     Filling capacity (per tank): 5.0 l
    •     Advertising area (W x H): 50 x 55 cm
    •     Unit price (net): € 715.–




  • Comfortable and individually adjustable carrying device.

  • The robust mini compressor comes with a 6V charger which recharges the compressor in 4 hours. The hose system is protected via a non-return valve.

    The compressor cannot be overcharged and is therefore safe to charge overnight.

  • Two-part tap fitting (two separate hoses)

    The use of armoured, i.e. textile-reinforced, silicone hoses allows safe dispensing of products at temperatures above 80°C degrees.

    The tap head is easily removed and equipped with two dispensing taps. The taps can be separated from the hose and dismantled for quick and easy cleaning. Damaged or defective taps can be exchanged within a minute by a user-friendly procedure.

  • The separating mechanism of the cup dispenser is controlled by rubber membranes which are available in different aperture sizes. These can be exchanged as required and serve to hold the cups securely in place while also allowing for their easy removal. Cup dispenser with exchangeable rubber membranes in different sizes.

  • There is even a holder on each side for inserting flags or banners.

    Flags are not provided by Cup Service GmbH.

The tanks of the Drink Man Vario2 are much taller than they are wide. This keeps the weight very close to the carrier's vertical axis and prevents it from tipping backwards, making it much more comfortable to carry.

  • Cup dispenser.

    The cup dispenser consists of 100% unbreakable polycarbonate. It is attached to the unit via black Velcro straps. The maximum cup diameter is 85 mm.

  • Cleaning the tanks and hose:

    For effective cleaning, use a solution of approx. 2-3 l hot water and a teaspoon of soda crystals. Open the tank, pour in the cleaning solution, close and shake well. Rotate the tank a few times and leave to soak, preferably overnight, then rinse out with hot water. To clean the hose, connect it to the filled tank and pump the liquid through. Leave to soak and rinse well.

  • This membrane-controlled compressor operates on demand and can pressurise up to approx. 500 l on one charge. That’s equivalent to approx. 2,500 x 200 ml coffee portions.

  • 5-litre insulated stainless steel tank.

    The insulation consists of an expanded polypro¬pylene (EPP) shell.
    The stainless steel tank and EPP shell are bonded together and hermetically sealed. That way the tanks can be safely held and transported by runners and service staff even when filled with hot drinks. This design also ensures that drinks stay hot even after several hours. And the same applies in reverse to cold products of course.

  • Service flap:

    The two-part tap fitting is fed in through the side and connected to the tanks via so-called push-fit couplings.